// For the highest cleaning and environmental standards
Our compact, modular system concept is based on highly efficient process technologies, which ensures excellent cleaning results while conserving resources.
Our cleaning systems have been developed for cubic components and provide maximum flexibility in the smallest of spaces. The complete infrastructure to meet the highest cleanliness standards is “on board”.
The benefits of ELWEMA:
- Energy efficiency
- Flexible basic concept
- Compact and modular design
- Turnkey solution for line integration into manufacturing lines
- Process responsibility
// -R-Gen2
Flexible cleaning with robot handling
The modular, standardised system concept enables expansions for any conceivable scenario, such as:
- Component changes
- Capacity adjustments
- Process adjustments
In addition to the cleaning cell, any automation can be combined with upstream and downstream processes.
// Processes
- Pre-cleaning
- Process and quality cleaning
- Upstream deburring
- Vacuum drying
- Workpiece cooling
// Specification
Fully automated cleaning process, manual/automatic loading and unloading
// Requirements
60 sec/component
Morphology <600 µm
Gravimetry <2 mg
// Workpieces
Cubic and rotationally symmetrical components
- EDU housing
- Housing parts
- Drives
- Cylinder head/cylinder block
- Rotationally symmetrical components such as crankshafts and camshafts
// Component handling
- Internal flexible robot handling
- Individual part or basket handling
- Any line integration
- Individual part loading and unloading
- Interlinked operation via floor or portal automation
// Quality assurance
Residual dirt analyses by a certified laboratory
// -R- Steam
Steam cleaner
A special innovation from ELWEMA for rotary components with the highest
- Cleanliness requirements
- Output quanities
Implemented for
- Minimal footprint
- Highest energy efficiency
// Processes
- Pre-cleaning
- Process and quality cleaning
- Surface cleaning
- Vacuum drying
// Specifications
Fully automated cleaning process, manual/automatic loading and unloading
// Requirements
13 sec/component
Morphology <600 µm
Gravimetry <2 mg
// Workpieces
Rotationally symmetrical and cubic components
- Gear wheels
- Input and output shafts
- Differential gearbox
- Rotor and stator shafts
- Housing parts
// Component handling
- Internal flexible linear or robot handling
- Individual part or basket handling
- Any line integration
- Individual part loading and unloading
- Interlinked operation via floor or portal automation
// Quality assurance
Residual dirt analyses by a certified laboratory